Sustainability

GRS 5.0: Key Checks for Textile Exporters

Published: 18/11/2026
Author: Fashion Value Chain

GRS 5.0: Key Checks for Textile Exporters Before December 2026

With GRS 5.0 effective from 1 July 2026, textile exporters must prepare for the new audit requirements before 31 December. The transition calls for closer checks on recycled content claims, certification scope, chemical compliance and shipment documentation.

The transition to Global Recycled Standard (GRS) 5.0 brings important compliance requirements for textile mills, traders, manufacturers and buyers. Published and effective from 1 July 2026, the new version introduces a critical deadline: from 31 December 2026, audits must be conducted against GRS 5.0. GRS 4.0 will no longer be accepted as the basis for audits after this date.

During the transition period, a certificate and its supporting audit report may refer to different standard versions. Therefore, exporters must look beyond certificate validity dates and check the version against which the audit was conducted.

The following areas highlight what businesses should review before the transition deadline.

1. Check the Certificate Version and Audit Date

A GRS certificate confirms that a particular site and product scope have been certified under a specified standard version. It also identifies the certification body and the validity period. However, the supporting audit report carries its own date and standard version.

This distinction is important during the transition. A valid GRS 4.0 certificate does not automatically demonstrate that an audit has been conducted against GRS 5.0.

Exporters should review three details for every certificate:

  • Which GRS version was used for the audit?
  • When was the audit conducted?
  • When does the certificate expire?

They should also update their certificate registers. In addition to the certificate holder, site, product scope and expiry date, businesses should record the standard version and audit date. This will help identify gaps before buyers or certification bodies raise them.

2. Understand the 20% Certification and 50% Labelling Thresholds

One of the key distinctions under GRS 5.0 is the difference between the recycled content required for certification and the percentage required for product-specific labelling.

Products must contain at least 20% recycled content to meet the certification threshold, subject to the applicable social, environmental and chain-of-custody requirements. However, a product-specific GRS label requires at least 50% recycled content.

These thresholds serve different purposes. A product containing 30% recycled content may qualify for certification but cannot carry the product-specific label. A product with 60% recycled content may qualify for labelling, provided the rest of the supply chain and the brand’s certification also support the claim.

The label must state the exact recycled content percentage. It must also clearly identify the product or component to which that percentage applies.

For example, a recycled nylon and spandex fabric may contain recycled content in its nylon component, while the spandex remains virgin. The certificate and label must make this distinction clear. A generic recycled claim without a defined component and percentage is not sufficient.

Certification scope is equally important. A GRS-certified fabric does not automatically make the finished garment GRS-certified. Every site handling the product must be covered by the certified chain. This includes cut-and-sew factories, printers, embroiderers and other processing facilities. The brand’s own certification must also support the label.

Therefore, exporters should map the complete supply chain before accepting orders or approving product labels.

3. Strengthen Chemical Compliance Under Section D2

Section D2 of GRS 5.0 addresses chemical restrictions and references the REACH Candidate List of Substances of Very High Concern (SVHC) and the ZDHC Manufacturing Restricted Substances List (MRSL).

Businesses must ensure that the buyer and certification body are working against the same applicable MRSL version. They should also maintain evidence that connects chemical compliance records to actual production batches.

For dyehouses, the required documentation includes:

  • Dyestuffs and auxiliaries held in chemical stores.
  • Safety Data Sheets (SDS).
  • MRSL conformance statements.
  • Batch records showing the chemicals used in production.
  • SVHC declarations for substances not covered by the MRSL.

A chemical inventory should do more than list products. It must also establish a clear connection between the chemicals, their supporting documentation and the production batches in which they were used.

Trim suppliers also require attention. Elastic, thread, labels, zippers, coatings and adhesives may involve chemical compliance requirements. Exporters should obtain relevant MRSL statements and supporting evidence from these suppliers.

4. Distinguish Between Scope Certificates and Transaction Certificates

A Scope Certificate (SC) and a Transaction Certificate (TC) serve different purposes under the chain-of-custody system. Neither document can replace the other.

A Scope Certificate confirms that a site and specified product scope are certified. It identifies the site, products and certification body. Its validity is time-limited and commonly extends to 12 months.

A Transaction Certificate, on the other hand, confirms that a specific shipment is covered by the certified scope. It records details such as the seller, buyer, product, quantity and transaction date. A TC is issued for each shipment.

An SC alone does not establish that the goods in a particular shipment are covered. Similarly, a TC cannot provide a valid basis for a transaction if the underlying SC is not valid.

Exporters should verify four details:

  • The SC holder must match the seller named on the invoice.
  • The SC product scope must match the product description.
  • The TC quantity must match the shipment and remain within the certified scope.
  • The TC date must fall within the SC validity period.

A TC is a chain-of-custody document. It is not a certificate of origin or a customs declaration. It confirms that the transaction is covered by the certification system, but does not establish that the fibre in a finished garment came from a specific bale.

5. Review the Small-Trader Exemption

GRS 5.0 provides a limited exemption for small traders. To qualify, a trader must meet the following conditions:

  • Annual GRS product turnover must be below US$10,000.
  • The trader must not repackage or relabel products.
  • The trader must be registered with the certification body.

This exemption does not mean that the trader is free from documentation requirements. Businesses claiming it should be able to provide evidence of certification body registration and the basis for their turnover.

The exemption also does not apply if the trader repackages or relabels products. Exporters should therefore check the activities carried out by suppliers before relying on this provision.

6. Four Actions to Complete Before the Audit Deadline

Businesses can address many transition-related gaps by reviewing four key areas.

Update the Scope Certificate: Confirm that every site handling the product is included in the certified scope. This includes facilities involved in dyeing, printing, bonding and trimming. Any subcontractor outside the scope falls outside the certification claim.

Strengthen the chemical compliance file: Map every dye, auxiliary and trim against the applicable MRSL version and SVHC list. Retain batch-level evidence linking the documentation to production.

Review labels and sales claims: State the exact recycled content percentage. Avoid generic claims such as “GRS certified” where the required percentage is not specified. Also confirm that the brand’s certification supports the use of the label.

Revise supplier contracts: Require a copy of the SC, a TC for every shipment and written confirmation of the applicable standard version. Include these requirements in the quality or compliance schedule to avoid differences in interpretation.

7. Ten Questions Exporters Should Ask Before 31 December 2026

Before the audit cycle closes, mills, traders and buyers should use the following checklist:

  1. Which GRS version was used for the audit, and when was it conducted?
  2. Is the Scope Certificate valid, and does it identify the correct site?
  3. Does the SC product scope match the fabric or garment being shipped?
  4. What is the certified recycled content percentage, and which component does it cover?
  5. Is there a Transaction Certificate for the shipment, with the seller, buyer, product, quantity and date?
  6. Does the TC quantity fall within the SC scope and validity period?
  7. Are all subcontractors, including dyeing, printing and bonding facilities, included in the SC?
  8. Which ZDHC MRSL version and REACH SVHC list were checked?
  9. Does the product label state the exact recycled content percentage, and is the brand certified to use it?
  10. If the small-trader exemption is claimed, is the certification body’s registration documented?

The Claim Must Not Outrun the Certificate

The transition to GRS 5.0 is not simply a documentation exercise. It requires businesses to ensure that their product claims are supported by valid certification and traceable evidence.

A sales team may make a GRS claim for a product below the labelling threshold. A Transaction Certificate may identify the wrong site. A chemical compliance file may also fail to connect its records to the relevant production batch. Each gap creates a commercial risk as well as a compliance concern.

Before 31 December 2026, exporters should update their certificate registers with the standard version and audit date. They should collect a TC for every shipment rather than relying only on Scope Certificates. They must also ensure that chemical compliance records answer MRSL and SVHC requirements at batch level.

Ultimately, buyers and certification bodies need clear evidence of the applicable standard, certified site and product scope. If a supplier cannot establish these details, its GRS claim may not be ready, regardless of how valid the certificate appears.

References

  • Textile Exchange, Global Recycled Standard 5.0 (GRS-101-V5.0), effective 1 July 2026.
  • Textile Exchange, GRS Claims Policy (TE-301), current version.
  • ZDHC Manufacturing Restricted Substances List (MRSL), version as agreed with the certification body.
  • EU REACH Candidate List of Substances of Very High Concern, current version.

About the Author

Wenruo is a fabric development engineer at Forall Lab, Haining Forall Digital technology Co.,Ltd., China. Wenruo works on knit fabric construction, testing and supplier qualification for activewear programmes, and writes about the relationship between fabric properties and finished-garment performance.

Company website: https://www.foralltex.com/

Related Posts

Simta Astrix the Best Brand in Doors and Windows at the ET Now InfraFocus Awards

SKA Arcadia Redefines Ghaziabad’s Commercial Landscape

KRR Heavy Engineering Expands into Aerospace Industry by Acquiring Advanced Drone and UAV Technology from National Aerospace Labs

ASICS Unveils GEL-KAYANO™ 32 with Advanced Stability